Diesel/Electric 1t 2t 2.5t 3t 3.5t 5t 6t 7t 10t Heli/Hangcha Rough Terrain Telescopic Handler Lift Pallet Stacker Electric Forklift Truck

• Customization: Available
• After-sales Service: Online Service
• Warranty: 1 Year
• Model NO.: FOCUS-4-5t K2
• Cab Location: Adjustable
• Type: Diesel Forklift
• Power: AC Motor
• Load Capacity: 5T - 10T
• Fuel: Diesel
• Load center: >500mm
• Lift height: >5000mm
• Condition: New
• Product Model: Cpds13-AC8b
• Power Type: Electric
• Rated Lifting Capacity: 1300
• Load Center Distance: 500
• Front Overhang: 360
• Wheelbase: 1250
• Own Weight: 2860
• Axle Load (Full Load, Front and Rear Axl: 3600/560
• Axle Load (Unloaded, Front and Rear Axle: 1350/1510
• Tire Type: Solid Tire
• Front Tire Specification: 18X7-8
• Rear Tire Specification: 15X4.5-8
• Front Track Width: 914
• Rear Track Width: 178
• Mast Tilt Angle (Front/Rear): 5.5/6
• Transport Package: Nude
• Specification: 11300*6050*4770
• Trademark: FOCUS
• Origin: China
• HS Code: 8427109
• Production Capacity: 50000 Untis Per Year
• Package Size: 11.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 20.000kg

Product Description

5-10t G Series Diesel / LPG Forklift Truck

1. The core components of frame, mast and overhead guard adopt CAE forward design to ensure the strength of the whole truck and make the whole truck stronger.
2. Independent integrated electronic control box features waterproof, dust-proof, heat insulation and oil pollution isolation and thus reduce the failure rate of electrical components and improve the convenience of maintenance.
3. The maximum opening angle of the hood reaches to 80 degrees, which provides a spacious space for inspection and maintenance.

Workplace: Widely used in factories, warehouses, stations, wharves, airports, ports, etc. for loading and unloading of packaged goods, and can also be used for loading and unloading of bulk cargoes and non-packaged cargoes after being equipped with other work attachments.

The whole machine adopts the engineconforming to the EU StageV and theAmerican environmental protection standard

1.The diesel engine adopts V2403 EU StageV and XINCHAl 3E22YG51 EU StageVelectronic high pressure common rail engine and DOC + DPF tail gas treatment technology.

2.Single/Dual fuel using WG2503 electronic high pressure common rail engine, usingthree catalytic tail gas treatment technology.

Specification

Technical Specifications

(Custom configurations available upon request.)

Three-point support battery forklift performance parameters table
	1	Product Model		CPDS13-AC8B	CPDS15-AC8B	CPDS16-AC8B	CPDS18-AC8B	CPDS20-AC8B
Characteristics	2	Power Type		Electric	Electric	Electric	Electric	Electric
	3	Rated Lifting Capacity	Q(kg)	1300	1500	1600	1800	2000
	4	Load Center Distance	c(mm)	500	500	500	500	500
	5	Front Overhang	x(mm)	360	360	360	360	365
	6	Wheelbase	y(mm)	1250	1250	1358	1358	1466
Weight	7	Own Weight	kg	2860	2980	3120	3240	3470
	8	Axle Load (Full Load, Front and Rear Axle Weight)	kg	3600/560	3890/590	4100/620	4350/690	4750/720
	9	Axle Load (Unloaded, Front and Rear Axle Weight)	kg	1350/1510	1350/1630	1440/1680	1440/1800	1530/1940
Tires and Track Width	10	Tire Type		Solid Tire	Solid Tire	Solid Tire	Solid Tire	Solid Tire
	11	Front Tire Specification		18x7-8	18x7-8	18x7-8	18x7-8	200/50-10
	12	Rear Tire Specification		15x4.5-8	15x4.5-8	15x4.5-8	15x4.5-8	15x4.5-8
	13	Front Track Width	b10(mm)	914	914	914	914	932
	14	Rear Track Width	b11(mm)	178	178	178	178	178
Dimensional Parameters	15	Mast Tilt Angle (Front/Rear)	(°)	5.5/6	5.5/6	5.5/6	5.5/6	5.5/6
	16	Mast Static Height	h1(mm)	1995	1995	1995	1995	1995
	17	Free Lift Height	h2(mm)	145	145	145	145	145
	18	Mast Lifting Height	h3(mm)	3000	3000	3000	3000	3000
	19	Maximum Height When Mast is Lifted	h4(mm)	3945	3945	3945	3945	3945
	20	Standard Overhead Guard Height	h6(mm)	2040	2040	2040	2040	2040
	21	Overall Length (Length to Fork Vertical Plane)	l2(mm)	1795	1795	1903	1903	2016
	22	Overall Width	b1(mm)	1086	1086	1086	1086	1153
	23	Fork Dimensions (Length × Width × Thickness)	s/e/l(mm)	920×100×35	920×100×35	920×100×35	920×100×35	1070×122×40
	24	Minimum Ground Clearance at Chassis, Full Load	m2(mm)	110	110	110	110	110
	25	Right Angle Stacking Aisle (1000×1200 Pallet Width)	Ast(mm)	3134	3134	3237	3237	3342
	26	Right Angle Stacking Aisle (1200×800 Pallet Width)	Ast(mm)	3257	3257	3360	3360	3465
	27	Minimum Turning Radius	Wa(mm)	1452	1452	1555	1555	1660

Enhanced Operator Presence System with comprehensive security upgrade

-Walking on site induction safety system

When the machine is running, the operator wll suddenly leave the correct operating position without releasing the acceleratorpedal, and the power will be cut off to protect the safety of running

-LHS (Load Handling System) on site induction safety system and reset control system

When the operator leaves or retums to the correct operating position wthout loosening the LHS control device, the operationbrought by the LHS operation wll be suspended and will not occur automatically, so as to protect the LHS operation safety.

-LHS (Load Handling System) static control system

When the LHS control device is operated and the engine is started, the operation brought by LHS control wll not happen
automatically after the engine is started. Only when the LHS control device is reset and then operated can the operation continue

-Non-parking security alarm system

When the forkift is not powered off and the driver is not using the parking brake, an audible warning is used to alert the driver.

Easy maintenance

Easy maintenance which is good for maintaining the optimal condition of key parts and completed truck and ensures safety and workefficiency is the necessary character of a good product.

Large engine hood opening angle

DPF (Diesel Particulate Filters ) automatic regeneration

Low after-sales maintenance cost

-Engine hood lock integrated on the hood is convenient for opening and close during mainte-nance.
-The gas spring has optimized arrangement, improved load carrying ability, opening angle,prolonged gas spring service life and improved opening comfort.80°engine hood openingangle offers wide operation space for check and maintenance.

Euro 5 diesel-powered model is equipped with DPF automatic regeneration function, and theinstrument is equipped with DPF blocking quantity display function (equipped with diesel vehicle),which is convenient for maintenance, When running the automatic regeneration program, theengine provides 100% power output. The DPF regeneration program can be interrupted at anytime. DPF cleaning interval increased from 3000 hours to 6000 hours

Equipped with Euro V diesel, liquefied gas, dual fuel power configuration to meet the needs ofdifferent users.
Based on the same platform of a variely of fuel (diesel /liquefied gas) configuration scheme, themain parts of the general, low after-sales maintenance cost is low.

Outstanding comfort

Ergonomic designs, optimized operating device structure and layoutimprove driving experience and ensure long hours of efficient operation.

Enlarged operating space
-Titing yinder located below the foor board, 3omm widened low ant-skidded step and 45% enlarged operation space at foot provide comfortentry, exit and operation.
-80mm heightened overhead guard and large arc shape of the overhead guards front leg enlarge operating space and reduce operatingfatigue.

Outstanding visibility

With three-stage free lit mast, front view width is increased by 30mm; with 15mm lowered instrument panel, the visibility of fork and goods isincreased by 20mm. CAE optimized counter weight structure improve rear view.

-LED combined instrument

With the clear displaying and right installment of the instrument, the operator can know the truck information in time.

-Rear assist handle (optional)

The assist grip with a hom enhances comfort by offering easyhom operation while travelling in reverse.

Service Promise

1.  24-hours hot line at your service, available for quality and extending service.
2. Lifelong free technical guidance service can be provided.
3. For Customers who buy bulk quantity for the first time, we can send service technicians to offer site instruction service
    and short- term stationary point service.
4. Free technical training can be provided to help customers use and maintain the trucks and trailers quickly and correctly.

About maintenance

During use, please pay attention to the following points:
1. Do not overload;
2. Whether the ground conditions allow use;
3. Load the cargo correctly;
4. Please wear safety shoes and gloves during operation;
5. Please do a thorough operation check before each use;
6. Use the correct lifting technique to assemble the machine;
7. Do not ignore the potential dangers that may exist during operation. During maintenance, mainly check the oil, remove the air and lubricate. It is recommended to check every six months. Special attention should be paid to the wheels, axles, handles, forks, lifting and lowering controls.
8. Whenever the work is completed, the forks should be unloaded and lowered to the lowest position.