Jlg-R1932 R1932I Aerial Work Platform Lift 250kg Hydraulic Electric Scissor Lift Table

• Customization: Available
• Application: Workshop Crane, Warehouse Crane
• Lift Mechanism: Scissor Lift
• Model NO.: JLG-R4045
• Moves: Self-propelled
• Driven Type: Hydraulic
• Running Mode: Moving
• Certification: ISO 9001
• Specification: 3175kg
• Trademark: JLG
• Origin: China
• HS Code: 8428909090
• Production Capacity: 5000 Vehicle/Year
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 3175.000kg

Product Description

Power supply
Battery		4 x 12v 150 amp-hr
Charger		27 amp High Frequency Charger
Basic specifications
Brake		Multi-Disc Friction (Hydraulic)
Capacity - Hydraulic Tank		29.90 L / 7.9 gal.
Hydraulic pump		Fixed Displacement Gear
Vehicle weight		3175.15 kg / 7000 lb
Self-respect		9.59 Kg/cm2 / 137 psi
Performance parameters
Travel speed - platform raised		0.80 km/h / 0.5 mph
Travel speed - platform lowered		3.38 km/h / 2.1 mph
Drive System		Hydraulic Front Wheel
gradeability		25%
Rise time		80 sec.
Lower time		41 sec.
Platform load		349.27 kg / 770 lb
Platform load - extension		113.40 kg / 250 lb
Platform load		41in x 96in
Turning radius - outside		2.54 m / 8 ft 4 in.
Dimensional data
Ground clearance		0.13 m / 5 in.
Machine height		2.54 m / 8 ft 4 in.
Machine height - folding rails		1.91 m / 6 ft 3 in.
Machine length		2.69 m / 8 ft 10 in.
Machine width		1.14 m / 3 ft 9 in.
Platform extension length		0.91 m / 3 ft
Platform height		11.96 m / 39 ft 3 in.
Platform height - lowered		1.4 m / 4 ft 7 in.
Platform height		8.84 m / 29 ft
Platform railing height		1.12 m / 3 ft 8 in.
Tire size		16 X 5in
Wheelbase		2.03 m / 6 ft 8 in.
Reach distance specification
Platform height		11.96 m / 39 ft 3 in.
Platform height		8.84 m / 29 ft
Working height		13.79 m / 45 ft 3 in.

The R series scissor aerial work platform has been completely redesigned from both the chassis and platform.
Including active dent protection system, simple arm design, thick tires and other configurations to ensure its success
A scissor aerial work platform that is more durable, easier to maintain, and more suitable for rental.

• Unique and wide tilt angle, different heights correspond to different tilt angles, suitable for multiple working conditions.
• Among products with the same operating height, R3246 has the lightest total weight and is the only one that uses unique single-lift oil
Products with cylinder design have fewer hydraulic oil pipes and joints, fewer leakage points, and low maintenance costs.


• Swing-out component compartment for easy maintenance.
• Low total cost of ownership thanks to lubrication-free parts.
• PHP uses a single piston rod and single-stroke switch, with a simple design, low component failure rate, and more economical maintenance.
• Suitable for both indoor and outdoor use with high stability.
• All use all-steel platforms and "parallel" fence designs, which are strong and durable.
• Most products (except R1932) adopt large 16x5-inch tires, which have strong spanning ability and are suitable for construction site applications.
It has a wider range of uses, which can increase the rental rate; the outer rubber is thicker, more wear-resistant, and can reduce maintenance costs.
• R4045 is a 12-meter height model, suitable for indoor and outdoor use, with 5 sets of scissor arms using a unique centerline
Design concept, with extra wide scissor arm span, small shaking, comfortable and safe operation.