12cbm Garbage Refuse Compactor Truck Waste Compactor Truck Compression Garbage Truck
| Product model |
FCS5160ZYS20E |
| Chassis model |
DFL1160BX2 |
| Chassis manufacturer of Compression Garbage Truck |
Dongfeng Automobile Co., Ltd. |
| Overall dimension of complete vehicle (mm) |
8310(8360;8350) ×2460×2860 |
| Wheelbase of Compression Garbage Truck (mm) |
4200 |
| Wheel track of front wheel (mm) |
1880 |
| Wheel track of rear wheel (mm) |
1860 |
| Kerb mass of Compression Garbage Truck (kg) |
9705,10095,10005 |
| Rated load of Compression Garbage Truck (Kg) |
6100,5710,5800 |
| Gross mass of Compression Garbage Truck (kg) |
16000 |
| Maximum vehicle speed of Compression Garbage Truck (km/h) |
90 |
| Maximum gradeability of Compression Garbage Truck (%) |
20 |
| minimum turning diameter of Compression Garbage Truck (m) |
18 |
| Minimum ground clearance of Compression Garbage Truck (mm) |
250 |
| Approach angle of Compression Garbage Truck (°) |
20 |
| Departure angle of Compression Garbage Truck |
13 |
| Dustbin volume of Compression Garbage Truck (m3) |
12 |
| Volume of precompressor (m3) |
1.9 |
| Compression cycle time of Compression Garbage Truck (s) |
30 |
| Garbage dumping time of Compression Garbage Truck (s) |
40 |
| Compression density of Compression Garbage Truck (t/m3) |
0.0.6-0.8 |
Compression garbage truck is a kind of municipal sanitation garbage truck.
The whole vehicle is composed of a sealed garbage compartment, hydraulic system, and operating system. There are several kinds of compressed garbage trucks at the rear of the compression garbage truck, such as hanging bucket compression garbage truck, dustpan bucket type rear flip compression garbage truck, swing arm compression garbage truck, etc.
The box material is made of high-quality carbon steel, with three sides and four sides. It adopts forward push and backward pressure, curved carriage with fully enclosed (manual operation), and the hydraulic control operating system is electric control and manual control. The loading cycle is a one-key operation. There is a set of left and right sides at the rear of the car, and a set of electric unloading operation system in the cab. The sewage in the sewage collection box at the bottom of the filler can flow into it, and it can be discharged through a ball valve when unloading garbage.
[Function introduction of compressed garbage truck]:
1. Compressed garbage truck, also known as after-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is used to dock with the trash can or the trash hopper, and they are combined into a mobile garbage transfer station to realize the pollution-free collection and removal of garbage in one vehicle and multiple buckets. Effectively prevent secondary pollution caused by scattering and flying during collection and transportation.
2. Combined control of gas, electricity and hydraulic pressure. The vehicle's control system comprehensively utilizes the advantages of electric control, air control and hydraulic control. The air control system is controlled by the electronic control system, and the operation of the hydraulic valve group is controlled by the air control system, which improves the reliability and efficiency of use.
3. Advanced electronic control system. Using PLC (programmable controller) integrated control, the control circuit is generated in the PLC, and the logic loop is adopted to ensure that the operation instructions are executed in order, and at the same time to ensure that the operation instructions are interlocked, and only external wiring is connected, which reduces the occurrence of failures. , To avoid accidents caused by misoperation and improve reliability;
4. Hydraulic lifting safety circuit. In the hydraulic system of the lift loader, a one-way balance valve is set. The valve not only guarantees the steady lowering of the filler, but also cuts off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not fall suddenly, which improves the safety of use.
5. The compressed garbage truck is in a closed state during compression, filling and transportation. A unique drain valve is installed on the sewage tank, which is reliable in sealing and not easy to be blocked. The optional filler completely covers the feeding port of the filler, eliminating the phenomenon of flying garbage and dust caused by the disturbance of the tail air flow during the transfer process, and the appearance is more beautiful.
[Remarks]: The vehicle is beautiful in appearance, excellent in performance, and advanced in control and control. It adopts two-way compression technology to complete the collection and transfer of urban domestic waste. The loading volume is 6 cubic meters, the compression ratio is more than 1:2.5, and the imported computer control system is adopted. The loading and unloading operations require a single driver to operate, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment. The operating system has dual functions of computer control and manual operation to ensure safety and increase vehicle utilization. Its comprehensive performance reaches the domestic level. Advanced level of similar products. It is mainly suitable for the collection and transportation of barreled, bagged and bulk domestic garbage in urban residential areas, communities, large factories and mines, institutions and universities. Multiple garbage collection methods for different users.
[After-sales maintenance]
(1) The maintenance of the vehicle chassis and supporting pumps shall be carried out in accordance with the corresponding operating instructions.
(2) Before the vehicle is used, it should be run-in according to the requirements of the vehicle instruction manual.
(3) Lubrication system maintenance: The vehicle needs to be cleaned and maintained every 5000km-10000km. When the engine noise is too large, the acceleration is weak or the water temperature is too high, it also needs to be cleaned and maintained. Cleaning the sludge and other deposits inside the engine can avoid the oxidation and thickening of the oil at high temperatures, which can effectively reduce the wear of engine components, thereby prolonging the life of the engine and improving the power of the engine.
(4) Cooling system maintenance: The vehicle should be cleaned and maintained once during the winter and summer seasons. I hope you clean and maintain it once every 6 to 8 months during normal driving, or when the water temperature is too high, water leaks, or the pot is boiling. Remove the traces and scale that cause the engine to overheat, prevent harmful corrosion, avoid and stop the leakage of seals and water tanks, and completely replace the old coolant.
(5) Fuel system maintenance: The vehicle needs to be cleaned and maintained once every 800km-1000km, or when you find the engine is trembling, lagging, poor acceleration, black smoke, weakness, and fuel consumption. It is necessary to remove the colloid and carbon deposits inside the system to prevent harmful corrosion, avoid and stop the leakage of seals and water tanks, and completely replace the old coolant.
(6) Gearbox maintenance: clean and maintain once every 800km-1000km of the vehicle, or when the gearbox slips, the water temperature is high, the gear shift is slow, or the system leaks. Remove harmful sludge and paint film deposits, restore the elasticity of gaskets and O-rings, make the gearbox shift smoothly, improve power output, and completely replace the old automatic transmission oil.
(7) Power steering system maintenance: The vehicle needs to be cleaned and maintained once every 1000km-2000km, or the system leaks when the steering is difficult, after replacing the power steering gear parts, it must also be cleaned and maintained once. Remove harmful sludge and paint film in the system, remove steering difficulties at low temperatures, stop and prevent leakage of power steering fluid, remove steering noise, and completely replace old brake steering fluid.
(8) Brake system maintenance: clean and maintain the vehicle once every 800km, or when the ABS reacts too early or too slow. Remove the harmful sludge paint film in the system, remove the danger of work failure at ultra-high temperature or ultra-low temperature, effectively prevent the brake fluid from deteriorating and expiring, and completely replace the old brake fluid.
HENAN FOCUS VEHICLES Co., Ltd. (Short for Focus Vehicles), is commited to R&D, manufacturing, sales and services of high-end special vehicles. It has been gained good reputation and awarded with honors and titles, such as"HENAN High-tech enterprise", "Trustworthy Brand", "Being committed to supplying high quality equipment and service for urban logistics and transportation", etc. Our mission is to creat more value for clients, employees, partners and shareholds, determined to become a real enterprise being respected in China special vehicles inducstry.
Various of trailers we can provide and be manufactured as special design and with environment protection equipments, Flatbed Semi-trailer, Container Chassis, Low-bed Semi-trailer, Fuel tank Semi-trailer, Bulk Cement Tank Semi-trailer, Fence semi-trailer, Side wall Semi-trailer, Box semi-trailer, Dump Semi-trailer, LPG LNG semi-trailer, Full trailer, Dump truck, fuel tanker truck, water tanker truck, cargo truck, concrete mixturetruck etc with great price and service advantages.
Clients visit
1**You please send us your enquiry;
2**We shall reply you with the quotation within 12 hours;
3**We negotiate on the configuration that you need;
4**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
5**Manufacturing process updated news → completing production;
6**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
Service Promise
1.24-hours hot line at your service, available for quality and extending service.
2. Lifelong free technical guidance service can be provided.
3. For Customers who buy bulk quantity for the first time, we can send service technicians to offer site instruction service
And short- term stationary point service.
4. Free technical training can be provided to help customers use and maintain the trucks and trailers quickly and correctly.
Why Choose Focus vehicles?
--WHAT ARE OUR ADVANTAGES ?
**Competitive price--We work as the leading dealers of Various leading China TRUCKS and SEMI TRAILERS, and Construction machinery manufactures/factories, and are treated with best dealership prices every year. From comparison and feedbacks from clients, Our price is more competitive than others even manufacturers/ factories.
**Ouick Response--Our team is consisted of a group of dilligent and enterprising people.Working 24/7 to respond client inquires and question all the time. Most problems can be solved within 12 hours.
**Fast Delivery--Normally it will take more than 30 days for manufacturers/factories to produce the ordered machine, while we have a variety of resources, locally and nation widely, to receive machines timely manner.
--WHICH PAYMENT TERMS CAN WE ACCEPT?
Normally we can work on T/T term or L/C term.
**On T/T term, 30% downpayment is required in advance, and 70% balance shall be settled before shipment, or against the copy of origial B/L for old clients.
**On L/C term, a 100% Irrevocable L/C without "soft clauses" can be accepted. Please seek the advice from the individual sales manager whom you work with.
--HOW LONG WILL OUR PRICE BE VALID?
We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year, We only adjust our price based on two situations:
** The rate of USD: RMB varies significantly according to the international currency exchange rates.
** Manufacturers/Factories adjusted the trucks and machinery price, becaue of the increasing labor cost, and raw material cost.
--WHAT LOGISTICS WAYS WE CAN WORK FOR SHIPMENT?
We can ship trucks, trailers and machinery by various transportation tools.
**For 90% of our shipment would go by sea, to all main continents such as South America, Middle East, Africa, Oceania and Europe etc. either by container or RoRo /Bulk shipment.
**For neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Uzbekistan etc., We can ship trucks trailers, machinery by Road or Railway.
**For light spare parts in urgent demand, we can ship it by international courier service. such as DHL, UPS, TNT, or Fedex.
Other trucks we can do
Contact:
Sindy Chen
Mobile:+ 86 15890188201
){kind=link}